Product ID:E-SOLDER HARDENER NO. 18
MSDS Date:01/05/1989
FSC:3439
NIIN:00N014851
MSDS Number: BKMBW

ALLIED PRODUCTS CORPORATION

NEW HAVEN, CT 06505
US

Emergency Phone: 203-562-2171;800-424-9300(CHEMTREC)

Info Phone: 203-562-2171

Cage: ACMED

ALLIED PRODUCTS CORPORATION

1404 NEW HAVEN, CT 06505 US

Telephone: (203) 562-2171

Cage: ACMED

POLYGLYCOL DIAMINE.

POLYETHYLENE POLYAMINE.

OSHA PEL 10 PPM (MFR)

ACGIH TLV: 10 PPM (MFR)

4,4'-ISOPROPYLIDENEDIPHENOL (SARA III)

CAS: 80-05-7

RTECS: SL6300000

Fraction By Weight: 15-25%

MIXING, AND CONTINUE TO STIR FOR AT LEAST 5

RTECS: 9999999ZZ

MATERIAL SAFETY DATA SHEET FOR BOTH COMPONENTS

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: VAPS ARE IRRIT TO EYES, NOSE &
THROAT. VAPS MAY CAUSE SENSIT OR ALLERGIC RESP RXN. SKIN: MAY CAUSE
SENSIT OR ALLERGIC SKIN RXN. MAY CAUSE CHEM BURN ON CONT. CAUSES
CHEM BURN & DMG TO EYE TISS O N CONT. INGEST: CAUSE BURNS OF MOUTH,
THROAT AND STOMACH WITH SEVERE ABDOMINAL PAIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN & GET MD
IMMED. SKIN: IMMED FLUSH SKIN W/PLENTY OF WATER FOR AT LEAST 15 MIN
WHILE REMOVING CONTAM CLTHG OR SHOES. GET MD. WASH CLTHG BEFORE
REUSE. DE STROY CONTAM SHOES OR LEATHER ARTICLES.INHAL: REMOVE TO
FRESH AIR. IF BRTHG IS DFCLT, GIVE OXYGEN & GET MD. IF BRTHG STOPS,
GIVE ARTF RESP, PREF MOUTH-TO-MOUTH, & GET MD IMMED. (SEE SUPP
DATA)

Flash Point:290F,143C
Extinguishing Media:ALCOHOL FOAM, DRY CHEMICAL, CO*2 & WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:PRODUCTS OF COMBUSTION AND DECOMPOSITION
MAY BE TOXIC; SEE REACTIVITY DATA.

Spill Release Procedures:COVER W/ABSORBENT SUCH AS SAND AND COLLECT IN
CNTNRS FOR DISP. RESIDUAL RESIN MAY BE REMOVED USING STEAM/HOT
SOAPY WATER. USE OF METHYLENE CHLORIDE OR OTHER SOLV FOR CLEANUP
POSES A DISTINCT HAZ & SHO ULD BE AVOIDED. PERS REMOVING SPILL
(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN TIGHTLY CLSD CNTNRS IN COOL,
DRY, WELL-VENT AREA. IF REFRIGERATED/FROZEN, ALLOW TO COME TO ROOM
TEMP BEFORE OPENING. DO NOT USE (SUPP DATA)
Other Precautions:HARMFUL IF INHALED/SWALLOWED. MAY CAUSE ALLERGIC SKIN
& RESP RXN. CAUSES BURNS TO EYES & SKIN. FOR INDUSTRIAL USE ONLY.
AVOID ALL CONT W/SKIN/EYES/CLTHG. IF MATL IS HEATED, AVOID BRTHG
VAPS. LAUNDER C OMTAM CTHG BEFORE REUSE.

Respiratory Protection:IF NECESSARY, USE NIOSH/MSHA APPROVED RESPIRATOR
WITH CARTRIDGE FOR ORGANIC VAPORS OR NIOSH/MSHA APPROVED SUPPLIED
AIR RESPIRATOR.
Ventilation:THOROUGH GENERAL MECHANICAL VENT REQUIRED. LOCAL EXHAUST
REC. VENT CURING OVENS OUTSIDE THE WORK AREA.
Protective Gloves:RUBBER OR PLASTIC; DISP GLOVES ACCEP.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB COAT/COVERALLS TO PREVENT CONTACT WITH
SKIN OR CLOTHING. EYE WASH STATION, SAFETY SHOWER & SINK.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING, SMOKING OR USING THE TOILET.
Supplemental Safety and Health
FIRST AID PROC: INGEST: GIVE TWO GLASSES (8 TO 16 OZ) OF WATER TO
DILUTE & GET MD. SPILL PROC: SHOULD OBSERVE ALL PRECAUTIONS & USE
APPROPRIATE PROT EQUIP (SEE CONTROL MEASURES). HNDLG/STOR PREC:
OVEN , HEAT LAMP OR HOT WATER TO THAW. FOLLOW MIX RATIO ON PROD
DATA SHEET. THORO STIR BOTH COMPONENTS BEFORE (SEE ING 4)

HCC:C2
Boiling Pt:B.P. Text:>385F,>196C
Vapor Pres:<0.33@25C
Vapor Density:7.6
Spec Gravity:1.0
Evaporation Rate & Reference:LESS THAN 1.0
Solubility in Water:PARTIAL
Appearance and Odor:AMBER LIQUID, MILD AMINE ODOR.
Percent Volatiles by Volume:<0.1

Stability Indicator/Materials to Avoid:YES
ACIDS, CHLORINATED HYDROCARBONS. MAY CORRODE COPPER OR BRASS.
Stability Condition to Avoid:STOR AT ELEVATED TEMPS, CONTAMINATION
W/MOISTURE, PREMATURE MIXING W/EPOXY RESINS/MIXING IN OTHER THAN
REC PROPORTIONS.
Hazardous Decomposition Products:OXIDES OF CARBON AND NITROGEN.
Conditions to Avoid Polymerization:AVOID MIXING MASSES GREATER THAN 1
LB. WITH EPOXY RESINS.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH APPLICABLE FEDERAL,
STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.